LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

J9089A Switch 2610-48-PWR, Giant RX Errors after Jumbo

 
Highlighted
LP4
Occasional Visitor

J9089A Switch 2610-48-PWR, Giant RX Errors after Jumbo

Hi , 

We have a 2610 connected to the Wireless Controller on a port which is receiving Giant RX errors. I have already configured Jumbo on the VLAN and ensured the port is in the same VLAN. 

However after clearing the port counters , the Giant RX still come back the next day. What is so strange is , it is always 17 errors , no less or more. I have also checked the Wireless controller itself and it does not have any tramsmit/receive errors on the port connected to the switch.

Can someone guide me in the right direction please.

1 REPLY
MstWntd
HPE Pro

Re: J9089A Switch 2610-48-PWR, Giant RX Errors after Jumbo

Dear Customer, 

For ProCurve switches, you may check the below link, which has got clear description and possible cause for Giant RX errors:

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02597291

And also help us with the exact Error message (the same error messages 17 times), so that we can check are they just general error messages here or not.

 

Regards

Gunz!
I am an HPE Employee