LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP using 2 different tranceivers

 
Highlighted
Occasional Contributor

LACP using 2 different tranceivers

hi,

I have two 5500 switches configured  IRF in that.

For L3 switch side I have one single mode tranceiver and one multi mode tranceiver,

Is it possible to configure LACP using these two different type tranciver...?

Thanks and regards,

Darshan.

1 REPLY 1
Highlighted
Respected Contributor

Re: LACP using 2 different tranceivers

Hello

Yes, that is be possible.

Check this previous post for more info: post