LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

OSPF between A and E Serie

SOLVED
Go to solution
Neonium
Advisor

OSPF between A and E Serie

Hi,

 

i have an OSPF between A Serie IRF Stack (5820), 3500yl and 5406. If I send a tracert command going to a vlan gateway which is on the IRF stack. I do not get the IP of the gateway.

 

traceroute to 10.60.60.211 ,
              1 hop min, 30 hops max, 5 sec. timeout, 3 probes
 1  *  *  *
 2 10.60.60.211         49 ms      1 ms      1 ms

This is an example of an IP that is in a Vlan which is on a switch behind the stack. Is this normal for the A Series Switches?

2 REPLIES
Richard Litchfield
Respected Contributor
Solution

Re: OSPF between A and E Serie

Try this on the Comware switch:

 

 ip ttl-expires enable
 ip unreachables enable

 

Neonium
Advisor

Re: OSPF between A and E Serie

Thanks

That was the solution