Routing between VLANs on 3Com 4200G

[Rouss]

Hi,

I have 3Com Switch 4200G 24-Port Software Version 3Com OS V3.02.07s168.

How to create routing between VLANs, which were created on this device?

[Vince-Whirlwind]

Add an IP address to each VLAN on the switch (maximum of 8 IP addresses).

Any device that uses one of these IP addresses as its default gateway will be routed by the switch.

[Rouss]

Your advice is right, if I want to use 4200G as a router.

I want enable communications between different VLANs on this device.

[Vince-Whirlwind]

Communications between VLANs is done with a router.

You can use the switch itself, by giving each VLAN an IP address on its interface. Alternatively, you can trunk all the VLANs to a router which can do the routing, like this picture: