Routing to different subnet in 3com 4500

[Kevinb_3]

My IP is 10.40.45.20

the 3com's IP is 10.40.45.110

I have no probem access switch.

I have a VPN tunnel to our datacenter between 10.40.45.1 <--> 192.168.199.1

how would I add a rount in the 3com 4500 so that our monitoring machine at 192.168.199.52 can reach the switch at 10.40.45.20.

The GUI needs Network, subnet, and next hop. Not sure what I need for those.

Thanks

[Vince_Whirlwind]

The "Next Hop" is the target for your route.

In other words, on your 3COM switch, to get to 192.168.199.0/24, it will presumably point to 10.40.45.1.