LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch 1910 does not create routes Direct (vlan-interfaces)

 
SOLVED
Go to solution
Ivans1910
Occasional Contributor

Switch 1910 does not create routes Direct (vlan-interfaces)

hello, I have a problem with a switch switch 1910 JE006A. 

 

my version of firmware is the latest , but check with previous versions and gives the same problem.

 

to create a VLAN interface. not the dynamic route is created:

 

*1     10.20.0.1 /24                  UP    MANUAL

10     10.20.10.1/24                 UP    MANUAL 

20     10.202.20.1/24                 UP    MANUAL

 

0.0.0.0 255.255.255.0 Static 1 10.20.0.1 Vlan-interface1

127.0.0.0 255.0.0.0 Direct 0 127.0.0.1 InLoopBack0

127.0.0.1 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0

10.20.0.1 255.255.255.0 Direct 0 10.20.0.230 Vlan-interface1

10.20.0.230 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0

 

 

 

this is normal? I would not have to add me routes to these interfaces as it does with VLAN 1

 

Thank you!

3 REPLIES
johnk3r
Respected Contributor
Solution

Re: Switch 1910 does not create routes Direct (vlan-interfaces)

Is there any device connected to the VLAN 10 or 20? Perform this test ..
**************************************
ATP FLEXNETWORK V3 | ACSA
Ivans1910
Occasional Contributor

Re: Switch 1910 does not create routes Direct (vlan-interfaces)

that was the problem! now I have another problem , connect the PC to the VLAN 10 or 20 with the interface you create for that VLAN does not answer ping me .. this as taged port VLAN it belongs
johnk3r
Respected Contributor

Re: Switch 1910 does not create routes Direct (vlan-interfaces)

You'd better open a new case. The original case is already solved.

**************************************
ATP FLEXNETWORK V3 | ACSA