HPE Community
LAN Routing
1752815 Members
6004 Online
108789 Solutions
New Discussion

Trunk vlan to WiFi access point

 
SOLVED
Go to solution
Exonix
Occasional Visitor

‎01-27-2019 08:25 AM

‎01-27-2019 08:25 AM

Trunk vlan to WiFi access point

Hello, we have this network:

The WiFi AP was connected to switch TP-link and we had two separate WiFi networks:

How I connected the AP to the Switch HPE 1820 8G (to 6th port) with the following configuration:

But such configuration doesn't work. What should I do to make WiFi 1 working again?

If I connect any device to port 2, it gets an IP form VLAN 405.

Thank you in advance!

0 Kudos
1 REPLY 1
Exonix
Occasional Visitor

‎01-27-2019 09:53 AM

‎01-27-2019 09:53 AM

Solution

Re: Trunk vlan to WiFi access point

the answer: Trunks in HPE 1820 are used not for VLAN Trunking, but for Link Aggregation!

to receive and transfer VLAN I have just to tag each port!

The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.