VLAN routing in HPE A5120-24G SI

[NikChallenger]

Hello! There are some problems with configuring the routing on the HPE A5120 SI.  I have Core switch HP Procurve 2920-24G (revision WB.15.11.0003, ROM WB.15.04) with ip routing enabled and several vlan's, and HPE A5120-SI (Software ver. 5.20 Release 1518P05) 

• Vlan10 is default vlan on HP 2920 (192.168.10.100/24)
• HPE 5120 have static route from 0.0.0.0/0 to 192.168.10.100
• Port 1 on 5120 is Access port in Vlan 10 and work fine, but if I try to change untagged vlan to another (eg vlan2) it stop working. I will be glad to any help.

[Vince-Whirlwind]

What is the IP addressing on the 2920 on VLAN2

What is the IP addressing on the host on the 5120 switchport when that switchport is untagged in VLAN 10

What is the IP addressing on the host on the 5120 switchport when that switchport is untagged in VLAN 2

[NikChallenger]

1.  2920 on VLAN2: 192.168.1.100

2. 192.168.10.0/24, work fine

3. 192.168.1.0/24, does not work

[Vince-Whirlwind]

We need to know the IP address, subnet mask and default GW for each.