LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

enable IPv6 traffic inter vlans on HP FF 5700-32XGT+ Switch

tiagoch
Occasional Visitor

enable IPv6 traffic inter vlans on HP FF 5700-32XGT+ Switch

Hi, 

I try to enable ipv6 traffic on my device with unicast-routing but i do not find this command only read multicast-routing.
my private network is running with ipv4 but i need to work with both protocol ipv4 and ipv6. I am using unique local unicass address ipv6 is like private address in ipv4 how to enable the traficc ipv6 for multiple vlans, adicional I am using IRF technology.

Thanks for your help .!

1 REPLY
16again
Respected Contributor

Re: enable IPv6 traffic inter vlans on HP FF 5700-32XGT+ Switch

Probably , you don't need to enable IPv6 routing.....if it's on by default.

Just assign IPv6 addresses to interfaces, each in their own /64 and enable RouterAdvertisements per interface