LAN Routing
1748182 Members
3560 Online
108759 Solutions
New Discussion

Re: few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

 
JitenShah
Occasional Contributor

few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

Hi,

     I need few commands for  ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)  -

 

1. to view forwarding table (FIB) [??]

 

2. to view all IP addresses configured on the box [show interfaces brief ??]

 

3. to view routing table (RIB) [show ip route ??]

 

The thing is I need to parse the output for these tables and I do not have access to the router. I need to find these commands and share it with our networking team.

I did find the commands but I am not sure if they are the ones I shall be using . It will be great if some once could help confirming.

 

 

thanks,

Jiten

4 REPLIES 4
paulgear
Esteemed Contributor

Re: few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

You can find all the commands you're looking for in the manuals: http://www.hp.com/rnd/support/manuals/5400zl.htm

Regards,
Paul
JitenShah
Occasional Contributor

Re: few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

Thanks Paul for the link but I could not still find command to view forwarding table.

I found one command called "debug ip fib" but no command to view that table.

 

I am looking for a table which  ProCurve J8697A Switch 5406zl uses to make the forwarding decisions.

Vince_Whirlwind
Trusted Contributor

Re: few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)

show mac-address displays the ports frames will be forwarded out.

paulgear
Esteemed Contributor

Re: few commands for ProCurve J8697A Switch 5406zl (Software revision K.15.03.0005)