hpe 1920s Vlan

[Amrsp]

I have 1920s 24

i have 2 VLan

with vlan ip interface 

my question is , can the 2 vlans route between each other without using another switch or router ?

[akg7]

Hi,

Are those two VLANS on same switch?

If it is in same VLAN then I believe there is no need of routing.

Kindly explain you issue in detail.

Thanks!

[Amrsp]

HI
I created 2 vlans on the same switch
VLAN 1 = 192.168.50.0 mask 255.255.255.0
VLAN interface ip 192.168.50.253

VLAN 2 = 192.168.0.0 mask 255.255.252.0
VLAN ip interface 192.168.1.61

I enabled routing from routing menue

But when any pc from any of the above subnets try to reach any pc in the other one doesn’t work

Every thing on the same hpe 1920s switch

That’s all

[akg7]

Hi,

Can you please share the config and conenctivity diagram in details.

I have replicated the same and I am able to ping each other without doing routing.

Thanks!