HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

instrumentation monitor pkts-to-closed-ports

 
Highlighted
APBOB
Occasional Visitor

instrumentation monitor pkts-to-closed-ports

Hello,

Where I can find detailed information on how works detection, where switch detects (on which Ethernet port, or detection is on MNG CPU port, or on which VLAN etc) how to troubleshoot "instrumentation monitor pkts-to-closed-ports". I have a lot of records related to "00830 inst-mon: ST1-CMDR: Limit for Pkts to closed ports (XXX) is exceeded (XXX)" and can't find any normal troubleshooting information on this in documentation, expect "Number of packets sent to closed switch TCP/UDP ports which could be related to ports scan". Capturing the data on each VLAN (I have 49) and check which device could generate such traffic isn't not an option...

Thanks in advice!