LAN Routing
cancel
Showing results for 
Search instead for 
Did you mean: 

inter-vlan routing plus trunk port on HP5800

 
Highlighted
Occasional Advisor

inter-vlan routing plus trunk port on HP5800

Guys is it possible to perform such setup on the subject line. Bridge-aggregation(LACP) plus Inter-vlan routing in HP 5800(Comware). Here's the physical setup:

Linux Server in Dual NIC(Bonding) using the open standard LACP  which is connected to the HP 5800.
Then 3 workstations connected to HP. 

THank you guys!

2 REPLIES 2
Highlighted
Honored Contributor

Re: inter-vlan routing plus trunk port on HP5800

LAG Link Aggregation - with or without LACP - (AKA BAGG or Port Trunking, as it is also named in HP/HPE networking jargon) has nothing to do with Inter-VLAN routing...I mean, you can have all the LAGs you want (up to the maximum supported value typical for your Switch(es)) and also have IP Routing enabled on your Core Switch (or Router, if you use an external router for that) to let your managed VLANs to being routed each others.

So what is the real question? what is the exact scenario?

Highlighted
Occasional Advisor

Re: inter-vlan routing plus trunk port on HP5800

Apprecaite your response sir, ive pasted the topology below with the GOALs and stated my current road block. thanks!TOPOLOGY.jpg