HPE Community
Operating System - HP-UX
1753808 Members
7456 Online
108805 Solutions
New Discussion

Alternate swap disk failed

 
Avinash Agarkar
Valued Contributor

‎05-28-2008 11:01 PM

‎05-28-2008 11:01 PM

Alternate swap disk failed

hi,

In my vg00 4 disk's are comnfigured and having the mirror copies also, the problem is out of four disks i have configured the two disks as a alternate swap with is lvswap.
and a single disk from that swap is failed.

so do i need to run the lvlnboot command after replacing the disk or any tips.


Thanks,
Avinash
Great Power Comes With Great Responsibility
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎05-28-2008 11:29 PM

‎05-28-2008 11:29 PM

Re: Alternate swap disk failed

All procedures are here:

http://docs.hp.com/en/5991-1236/When_Good_Disks_Go_Bad.pdf

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.