HPE Community
Operating System - HP-UX
1751887 Members
5508 Online
108783 Solutions
New Discussion юеВ

Re: How do yuo know if a LV is in use? and if a LV is mounted?

 
SOLVED
Go to solution
A. Clay Stephenson
Acclaimed Contributor

тАО05-04-2007 03:22 AM

тАО05-04-2007 03:22 AM

Solution

Re: How do yuo know if a LV is in use? and if a LV is mounted?

In your case, /dev/vg00/lvol2 is your primary swap area and was automatically enabled when the system booted. No fstab entry is used for the primary swap area. You can verify this by "lvlnboot -v /dev/vg00".

You can get lsof from any of the HP-UX Porting Centres.

http://hpux.its.tudelft.nl/hppd/hpux/Sysadmin/lsof-4.77/
If it ain't broke, I can fix that.
0 Kudos
mVivas
New Member

тАО05-04-2007 03:39 AM

тАО05-04-2007 03:39 AM

Re: How do yuo know if a LV is in use? and if a LV is mounted?

thanks to all, i├В┬┤m going to check my swap area.
0 Kudos
mVivas
New Member

тАО05-04-2007 03:40 AM

тАО05-04-2007 03:40 AM

Re: How do yuo know if a LV is in use? and if a LV is mounted?

bye
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.