HPE Community
Operating System - HP-UX
1752812 Members
5741 Online
108789 Solutions
New Discussion

How to mount storage disk on hp unix 11i

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

‎11-09-2005 05:01 AM

‎11-09-2005 05:01 AM

Re: How to mount storage disk on hp unix 11i

This is a part from your output:

/dev/dsk/c0t2d0s2 (0/0/2/0.2.0) -- Boot Disk
/dev/dsk/c0t0d0 (0/0/2/0.0.0) -- Boot Disk

You can see, there is a device "c0t2d0s2" and a "c0t0d0". First one is working, first one has *partitions". You will see 3 different partitions for this disk in ioscan:

c0t2d0s1 - EFI Boot partition
c0t2d0s2 - OS
c0t2d0s3 - system utilities

Your second disk has only 1 "partition" for OS, boot area is missing! So this disk cannot boot!

You need to follow the given procedure (see link above) to mirror a boot disk in itanium servers, create disk partitions (idisk) and so on...
always use the ...s2 device for LVM related commands!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Michael Mtweve
Occasional Advisor

‎11-10-2005 12:39 AM

‎11-10-2005 12:39 AM

Re: How to mount storage disk on hp unix 11i

thanks for your comments and links to usefull documents
















0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.