Operating System - HP-UX
1748088 Members
5026 Online
108758 Solutions
New Discussion юеВ

Re: Itanium/vpars changing boot disk address on fibre

 
SOLVED
Go to solution
Paul Clayton
Frequent Advisor

Itanium/vpars changing boot disk address on fibre

I have to migrate a fibre link to another switch, which will cause our Integrity servers with VPARs to require an address change and set up for the new scsi address. Is there a documented procedure on this, as I cannot find anything.

regards
6 REPLIES 6
Robert-Jan Goossens_1
Honored Contributor

Re: Itanium/vpars changing boot disk address on fibre

Hi Paul,

How about this doc?

Title: Prepare LVM for hardware / disk / lun changes
Document ID: KBRC00017736
Last Modified Date: 1/17/06

Itanium and PA-Risc

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000082066567

Regards,
Robert-Jan
Paul Clayton
Frequent Advisor

Re: Itanium/vpars changing boot disk address on fibre

Doesn ot answer my question for boot disks. My hardware path changed from switch ID 2 to swithc id 4.
Robert-Jan Goossens_1
Honored Contributor

Re: Itanium/vpars changing boot disk address on fibre

Paul Clayton
Frequent Advisor

Re: Itanium/vpars changing boot disk address on fibre

This only addresses normal disks on PA machines. My issue is with itanium. I found a document, that addressed this, but the commands did not work at all. The server paniced each time.
Torsten.
Acclaimed Contributor
Solution

Re: Itanium/vpars changing boot disk address on fibre

see this document:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00114493&prodTypeId=12169&prodSeriesId=89018

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul Clayton
Frequent Advisor

Re: Itanium/vpars changing boot disk address on fibre

Thanx. That document did the trick. It all depends on what you ask for in your search string.