LVM -Redundancy Groups

 
Kosmider
Occasional Contributor

LVM -Redundancy Groups

I have VA7400, HP-UX 11.00.
There are two Redundancy Groups on this array.
Can I create logical volume spans on both
Redundancy Groups.

Krzysztof
2 REPLIES 2
Luk Vandenbussche
Honored Contributor

Re: LVM -Redundancy Groups

Hi Krzystof.

No you cannot do this.

The maximum LUN size is the maximum capacity in a Redundancy group.

Aftwards you can add this two luns to the same volumegroup, so you can combine these size here to have a big filesystem
Torsten.
Acclaimed Contributor

Re: LVM -Redundancy Groups

The LUNs on the array are limited to a redundancy group, but you can create LVOLs across several LUNs.
No problem.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!