HPE Community
Operating System - HP-UX
1753643 Members
5187 Online
108798 Solutions
New Discussion юеВ

Re: Mirror and striping.

 
SOLVED
Go to solution
Patrick Wallek
Honored Contributor

тАО02-10-2004 02:05 AM

тАО02-10-2004 02:05 AM

Re: Mirror and striping.

The "pseudo-striping", aka Distributed striping, was first made available in 10.20 with a patch, 11.0 and yes it is available in 11.11 as well.

I have used it in the past, and I am actually currently using it on some FC10s on a 10.20 box. The Distributed striping may not be the ideal setup for "striping" and mirroring but it does work. I personally think it's better than nothing.
Reply
Pippo_9
Frequent Advisor

тАО02-10-2004 02:12 AM

тАО02-10-2004 02:12 AM

Re: Mirror and striping.

Summing up,

you can't have regular striping with mirror at the same time on 11i (the version which I am interested in), you can only have "pseudo" striping.

Correct??

Juan Paco Morientes
0 Kudos
Reply
Patrick Wallek
Honored Contributor

тАО02-10-2004 02:23 AM

тАО02-10-2004 02:23 AM

Re: Mirror and striping.

You are correct, yes!
0 Kudos
Reply
Patrick Wallek
Honored Contributor

тАО02-10-2004 02:25 AM

тАО02-10-2004 02:25 AM

Re: Mirror and striping.

Actually, if you are talking strictly LVM then yes, you are correct.

If you want to buy or upgrade to the full version of Veritas Volume Manager that product WILL allow a true RAID 10 (striping/mirroring) volume.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.