Output Ioscan and lvmtab is diferent!!!

[Miguel Carabano_1]

Hi,

After to reconectar the Server, i can´t activate volume group of data.
output:
#ioscan -fnC disk

Is Different of /etc/lvmtab

as I can solve the problem?

Thanks,

Migu

[G. Vrijhoeven · Accepted solution]

Migu,

What you can do is move the lvmtab to lvmtab.back and do a vgscan to recreate the lvmtab.

# mv /etc/lvmtab /etc/lvmtab.back
# vgscan -p -a
like what you see?
# vgscan -a

HTH,

Gideon

[Cheryl Griffin]

Or vgexport -m map .... vgimport specifying the correct disks.

[SS_6]

# mv /etc/lvmtab /etc/lvmtab.back
# vgscan -a -v
It will create new lvmtab file

[Suresh Patoria]

Hi,

Will u post both the output

Thanx

[Trond Haugen]

Could be worth calling HP support fi the problem is still unsolved and the data/downtime is of value.

Regards,
Trond

[generic_1]

Do you have a Make tape or make net backup so you could recovery the sysetm easily?

[Ravi_8]

Hi

propably disks may not be connected properly

[Miguel Carabano_1]

thanks!