Raid /dev/ciss recovering progress

[Guim4]

It there a way to show raid recovering progress.  Cant dint anything with saconfig or sautil

# saconfig /dev/ciss1

******************** SmartArray RAID Controller /dev/ciss1 ********************

Auto-Fail Missing Disks at Boot     = disabled
Cache Configuration Status          = cache enabled
Cache Ratio                         = 25% Read / 75% Write

---------- PHYSICAL DRIVES ----------

Location  Ct Enc Bay       WWID           Size       Status

Internal  1I   1   8  0x500000e0156a9682  36.4 GB    OK
Internal  1I   1   7  0x500000e0156a9952  36.4 GB    OK
Internal  1I   1   6  0x500000e0156a91c2  36.4 GB    OK
Internal  1I   1   5  0x500000e0156a94b2  36.4 GB    OK

---------- LOGICAL DRIVE 0 ----------

Device File     = c1t0d0
RAID Level      = 5
Size            = 104099 MB
Stripe Size     = 16 KB
Status          = RECOVERING

Participating Physical Drive(s):

Ct  Enc  Bay         WWID          
1I    1    8  0x500000e0156a9682
1I    1    7  0x500000e0156a9952
1I    1    6  0x500000e0156a91c2
1I    1    5  0x500000e0156a94b2

Participating Spare Drive(s):

None

[Patrick Wallek]

Have you tried 'sautil'?

Perhaps:

# sautil /dev/ciss1

# sautil /dev/ciss1 stat

[Guim4]

Doesnt tell me the progress %

# sautil /dev/ciss1|more

******************************************************************************
****                                                                      ****
****             S A U T I L   S u p p o r t   U t i l i t y              ****
****                                                                      ****
****             for the HP SmartArray RAID Controller Family             ****
****                                                                      ****
****                           version A.02.10                            ****
****                                                                      ****
****  (C) Copyright 2003-2005 Hewlett-Packard Development Company, L.P.   ****
******************************************************************************

---- DRIVER INFORMATION ------------------------------------------------------

  Driver State........................ READY

---- CONTROLLER INFORMATION --------------------------------------------------

  Controller Product Number........... P400
  Controller Product Name............. HP PCIe SmartArray P400
  Hardware Path....................... 0/3/0/0/0/0
  Serial Number....................... P61620D9SUG5IO
  Device File......................... /dev/ciss1
  Hardware Revision................... 'D'
  Boot Block Revision................. 0.02
  Firmware Revision (running)......... 2.08
  Firmware Revision (in ROM).......... 2.08
  Firmware Revision (inactive)........ 2.08
  # of Logical Drives................. 1
  # of Physical Disks Configured...... 4
  # of Physical Disks Detected........ 4
  Logical Drive Rebuild Priority...... 118 (high)
  Array Capacity Expansion Priority... 0   (low)
  Auto-Fail Missing Disks at Boot..... disabled
  SCSI Transfer Detection Mode........ Auto Detect

---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------

  Array Accelerator Board Present?.... yes
  Cache Configuration Status.......... cache enabled
  Cache Ratio......................... 25% Read / 75% Write
  Total Cache Size (MB)............... 208
    Read Cache........................ 052
    Write Cache....................... 156
    Transfer Buffer................... 000
  Battery Pack Count.................. 1
  Battery Status (pack #1)............ ok

---- LOGICAL DRIVE SUMMARY ---------------------------------------------------

       #   RAID      Size        Status  

       0   5        104099 MB    RECOVERING

---- SAS/SATA DEVICE SUMMARY -------------------------------------------------

  Location  Ct Enc Bay       WWID           Type         Capacity   Status

  internal  1I   1   8  0x500000e0156a9682  DISK         36.4 GB    OK       
  internal  1I   1   7  0x500000e0156a9952  DISK         36.4 GB    OK       
  internal  1I   1   6  0x500000e0156a91c2  DISK         36.4 GB    OK       
  internal  1I   1   5  0x500000e0156a94b2  DISK         36.4 GB    OK       

---- SAS/SATA BOX SUMMARY ----------------------------------------------------

  Location  Ct   Enc  Expander_count    Bay_count     SEP_count    

  internal  1I   1    0                 4             1             
  internal  2I   1    0                 4             1             

---- LOGICAL DRIVE 0 ---------------------------------------------------------

  Logical Drive Device File........... c1t0d0
  Fault Tolerance Mode................ RAID 5 (Distributed Data Guarding)
  Logical Drive Size.................. 104099 MB   
  Logical Drive Status................ RECOVERING