LVM and VxVM
cancel
Showing results for 
Search instead for 
Did you mean: 

Remove the Mirrored Root Disk

 
qijian_li
Occasional Visitor

Re: Remove the Mirrored Root Disk

Firstly, an in-built SmartArray RAID Controller with RAID level 1 also need two disks to realise it with sasmgr command. you can conferm the raid 1 as followed command:
sasmgr get_info -D /dev/sasd0 -q raid

next step to remove the mirrored root disk:
lvreduce, vgreduce, idisk, pvcreate...

email:qijian_li@hpsupport.com
Highlighted
Torsten.
Acclaimed Contributor

Re: Remove the Mirrored Root Disk

Don't get confused, even if the partitions on the disks are deleted, the device files are still shown until they are removed too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!