Slow sytem boot HP-UX 11i v2

[Vreriks Marcel]

Hello,

We have a Veritas cluster of 4 HP-UX 11iv2 systems connected at an EMC storage.
After we buildin 50 new disk in the EMC storage and configured a system boot of the HP-UX machine is very slow. It's take 35 minutes to boot in multiuser mode. During booting the system it stays 30 minutes on:
Starting vxconfigd in boot mode (pre_init_rc).

After several messages from the EMC like:
EMC claim_device: found NR (Not Ready) device dev=/dev/rdsk/c14t0d3.

The system finally start to multi-user mode.

It seems that HP-UX doesn't recognized the new disks from the EMC.
So it there something we forfotten?

[Steven E. Protter]

Shalom,

Make sure the disks are presented to the HP system with the correct World Wide Name and the problem should stop happening.

insf -C disk

SEP