The specified path does not correspond to physical volume

[Joakim Rudén]

Hi Jose

$ ioscan -fknC fc
Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/2/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 0/6/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1



$ fcmsutil /dev/td1 replace_dsk
Error: nport_id () is not a valid number.

My question is which portid I have to issue here. ?

[Joakim Rudén]

Hi Nojoki

I don't find any /dev/dsk/c31t1d2 and /dev/dsk/c31t0d3 disks when i run ioscan -fnC disk

Regard
Tien

[nijokj]

let me know your all vgs are activated or not?
You have any issue with any of the filesystem which can be mounted.?
Before doing this activity have you create the map file of vgs.
Reply pls.

[Joakim Rudén]

Thank for your reply, Nijoko

All of Vg are activated with filesystem
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 2097152 845432 1242024 41% /
/dev/vg00/lvol1 1776056 54488 1543960 3% /stand
/dev/vg00/lvol8 8912896 4598384 4284856 52% /var
/dev/vgnetapp_teleca/lvol1
3375104 1975755 1311921
........

And I see that we have 2 fibercards : 0/2/1/0(old) and 0/6/1/0( new) but when I run ioscan -fnC disk the result i got is there is only fibercard 0/2/1/0 is accessing disks while the new fibercard doesn't contact with disks although it's on .

ioscan -fknC fc
Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/2/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 0/6/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td1
ios


ioscan -fnC disk ( all disks are in 'claimed' status with 0/2/1/0)
Class I H/W Path Driver S/W State H/W Type Description
=============================================================================
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE TEAC DW-224E
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 73.4GHUS153073VL3800
/dev/dsk/c2t1d0 /dev/rdsk/c2t1d0
disk 1 0/1/1/1.0.0 sdisk CLAIMED DEVICE HP 73.4GST373454LC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0
disk 163 0/2/1/0.1.34.0.0.0.0 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c21t0d0 /dev/rdsk/c21t0d0
disk 184 0/2/1/0.1.34.0.0.0.1 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c21t0d1 /dev/rdsk/c21t0d1
disk 167 0/2/1/0.1.34.0.0.0.2 sdisk CLAIMED DEVICE NETAPP LUN
/dev/dsk/c21t0d2 /dev/rdsk/c21t0d2
disk 186 0/2/1/0.1.34.0.0.0.3 sdisk CLAIMED DEVICE NETAPP LUN


Regard
Tien

[nijokj]

So the issue is alternate path to disks are missing.
Once you change the fc card you need to recreate the www zoning.If you have storage team please contact them.

[Jose Mosquera]

Hi Tien,

The command must be:
#fcmsutil /dev/td1

My post (replaced device) to indicate you that the device correspond to replaced fibercard. :)

Rgds.

[Joakim Rudén]

Hi.
Thank you for your advices.

To solve this prolem I think I´'ll invite a specialized staff to come our company and can help us out as both of you suggested.

Best Regard
Tien

[Joakim Rudén]

Hi

We got advices from HP support that we need

Regard
Tien