VCS problem

 
SOLVED
Go to solution
Shah Gaurang B.
Frequent Advisor

VCS problem

Hi Friends,

Can you all help for veritas cluster . Request you all to provide me steps to stop & start package and stop & start veritas cluster . I am aware about LVM cluster but not about veritas .

Thanks in advance to all
3 REPLIES 3
melvyn burnard
Honored Contributor

Re: VCS problem

I suggest you take a look at the Symantec web site for this:
http://www.symantec.com/enterprise/products/overview.jsp?pcid=1019&pvid=20_1
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Premgy Varghese
Occasional Advisor
Solution

Re: VCS problem

~In a nutshell~Refer above docs for the details of options.

Cluster Starting:

hastart system_name

Stopping:

hastop -local|-all|-force|-evacuate
hastop -sys system_name

Package Start/Stop (online/offline):
===================================
hagrp -online|-offline group_name -sys system_name

Clear Resource Faults
=====================
hares -clear res_name -sys system_name
Armin Kunaschik
Esteemed Contributor

Re: VCS problem

Start- and stop-scripts are not enough to get a VCS cluster running!
You also need to provide monitor and (if suitable) clean scripts to get a running application.
In addition you need to build a dependency tree for your ressources.

Check the recommended Veritas documentation AND attend a VCS course. It doesn't matter if Veritas says, that the classes are only for Solaris... VCS is nearly 100% identical on HP-UX.

My 2 cents,
Armin

PS: Please assign points if you find answers useful!
And now for something completely different...