artic960

[claudiom]

I try to install an artic960 x.25 card on a HP L class 9000 server,but the system will not boot.

[Peter Godron]

Hi,
assuming you have checked compatibility, what are the indicators/problems with the reboot? Does it complain about missing drivers, how far does the boot progress ?

[claudiom]

Hi

I have been told that the card was installed once before.




************* SYSTEM ALERT **************
SYSTEM NAME: titan
ALERT LEVEL: 8 = Boot Possible, performance impaired

REASON FOR ALERT
SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result

LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH ON OFF ON
LED State: Unrecognized state - Refer to LED Decoder on your Support CD.

0x7010028166002030 0B0003FF D0100019 - type 14 = Problem Detail
0x4810028166002030 5461736B 7265666C - type 9 = ASCII Message reflTask
0x4810028166002030 78632E43 4C4F4765 - type 9 = ASCII Message LOGexc.C
0x7010028166002030 00000000 00002275 - type 14 = Problem Detail
0x70100A8166002030 000DA628 226A2004 - type 14 = Problem Detail
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:

I also tried to boot manually:

Main Menu: Enter command or menu > sea

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 0/0/0/0 lan.172.16.1.14 LAN Module
P1 0/0/2/0.2 intscsia.2 Random access media
P2 0/0/2/0.0 intscsia.0 Random access media


Main Menu: Enter command or menu > bo p2
Interact with IPL (Y, N, or Cancel)?> y
ERROR: A fatal error has occurred- system cannot boot.
Review warning messages in the Information menu.
Boot terminated.

Main Menu: Enter command or menu >