LVM and VxVM
cancel
Showing results for 
Search instead for 
Did you mean: 

configure SAN Storage in HP-UX Server

 
Ajin_1
Valued Contributor

configure SAN Storage in HP-UX Server

Dears

We are Prchasing new SAN and we need to configure it on RP 8400 running HP-UX

What are the Step by Step Commands

How to create LUNS

Please help

Ajin

Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
3 REPLIES 3
basant
Frequent Advisor

Re: configure SAN Storage in HP-UX Server

Hi Ajin

            what kind of storage (SAN / NAS / DAS ) you are going to install with HP-UX Box.

            If possible please share Manufacturer & model number of staorge.

 

 

Basant Sharma
Torsten.
Acclaimed Contributor

Re: configure SAN Storage in HP-UX Server

For the server the LUN is just like any other disk - the important steps of configuration are done on the array side.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
pradeep m
Respected Contributor

Re: configure SAN Storage in HP-UX Server

Depending upon the storage, create the LUN's and present to the HP-UX host from the array side.

After the LUN presentation, from HP-UX run the below commands to detect the new LUN's.

# ioscan -fnC disk

# insf -e 

 

 

Regards,
Pradeep

I am an HP Employee
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details