ioscan not showing iscsi attached SAN disks after reboot

[GraceO]

After rebooting one of our rp3440 servers, a couple of volumes failed to mount because the disks were not found. These are iscsi attached SAN disks that fail to even appear when I run an ioscan. Any suggestions on how to 'see' the disks again?

[Kapil Jha]

Can u see...fc cards onlune
ioscan -fnC fc
fcmsutil
Are these devices in NO_HW state or not all showing up.
BRM
Kapil+

[GraceO]

I don't see anything at all. And, they are not fc, which I think is fibre channel, we use iSCSI.

[GraceO]

iscsiutil shows I can connect...I only see 1 of 8 devices('disks'). None of the others.

[Kapil Jha]

hmmm never workrd on iscsi....
BR,
Kapil+

[GraceO]

Sorry everyone! It turned out to be a SAN issue.

[GraceO]

Thanks, Kapil!