lost mirror in vg00

[Cesar_31]

Hello,
i have a rx4660 with mirror disk in vg00. Some weeks ago, one of the disk was in fail, from hp support this disk was replace with another one. Yesteday the other disk was fail, and then we can check that the mirror was not correctely recover, and the system do not boot. All information is available into one diskbut this disk is not bootable....how can i access information into the good disk? How can i assign the boot partition again into good disk?
BR

[sujit kumar singh]

hi

can ypu post the boot time messages.


go into the EFI Shell : you can choose from the EFI menu "Built-IN EFI Shell"

Shell>fs0:
fs0:>cd efi\hpux
efi\hpux> boot vmunix -lq

this shall try to boot the disk in Quorum Override mode, if that fails


go to EFI
From the EFI Menu Screen choose
"Built-IN EFI Shell"


Shell>fs0:
fs1:>cd efi\hpux
efi\hpux> boot vmunix -lq

see if the system boots.


plezase post the error messages by capturing the screen of the system boot.


regards
sujit

[jmreyes · Accepted solution]

Hi Cesar,

Good Day !!!!

Do you performed Ignite Backup? ioscan fnC disk captured or i/o path of the disk.

use ignite backup for restoring ur os.
i/o path can help using the boot path were possible disk no yet failed.
ex;efi>hpux -lq /0/0/0/1.0.0.0---path of disk

also see attachment for rx mirroring