Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

lvextend error

manal_1
Occasional Contributor

lvextend error

when doing a a Hard Mirror and at lvol6 i had a problem .
#lvextend -m 1 /dev/vg00/lvol6 /dev/dsk/c1t5d0 /dev/dsk/c1t6d0
the newly allocated mirrors are now bing synhronized. This operation will take some time . please wait
and after that this error message appeared

lvextend : Couldn't re-synchronize stale partitons of the logical volume : I/O error
lvextend :Couldn't resynchronize logical volume "/dev/vgoo/lvol6".

what this message means and what the solution
thanls alot
3 REPLIES
Highlighted
Jeeshan
Honored Contributor

Re: lvextend error

Seems that you have error in HDD.
check with this command

#lvdisplay -v /dev/vg00/lvol8 | grep stale


and also refer this thread.

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1047513
a warrior never quits
Steven E. Protter
Exalted Contributor

Re: lvextend error

Shalom, the target disk is either offline or has bad sectors.

Check /var/adm/syslog/syslog.log for lbolt errors and either use another disk for the mirror or conduct repairs.

http://docs.hp.com/en/7161/LVM_OLR_whitepaper.pdf

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Bijeesh
Respected Contributor

Re: lvextend error

hi
You need how many no:of copies?( -m 1 or 2 ?)
#vgdisplay -v vg00 | grep -i stale
check for stale PEs.
Also #vgdisplay -v vg00
Check that the hard disks are 'available'.