HPE Community
Operating System - HP-UX
1753917 Members
7576 Online
108810 Solutions
New Discussion юеВ

Re: lvm VG corrupted HP-UX 11i

 
Torsten.
Acclaimed Contributor

тАО02-10-2011 07:09 AM

тАО02-10-2011 07:09 AM

Re: lvm VG corrupted HP-UX 11i

I would try to activate the VG again, even if it is currently active.

# vgchange -a y vg01

maybe this already helps.

If not, at next downtime deactivate and active the VG.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
hbhua_231
Advisor

тАО02-17-2011 08:36 PM

тАО02-17-2011 08:36 PM

Re: lvm VG corrupted HP-UX 11i

hello Dan Ryan:

According to your post, i find you still missed 1536 PE in vg01.

and your current lv is 6, but open lv is 3,

i think you still lost 3 lv in vg01.

To resolve this problem, please post

vgdisplay -v /dev/dsk/c2t2d0 and

vgdisplay -v /dev/dsk/c1t2d0.

Then to recreate the missed lv.
0 Kudos
Reply
Das_5
New Member

тАО02-18-2011 12:34 AM

тАО02-18-2011 12:34 AM

Re: lvm VG corrupted HP-UX 11i

Hi,

1:do an import export of the VG
2:Remove all lv device file from the /dev/vg01 and recreate the same with mknod
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.