pvlink question

[mark.M]

Hi! help~
*Install SPEC*
1.HP rx2660(11iv3) * 2EA(MC/SG)
2.8/8 SAN Switch-e port * 2EA
3.MSA2312fc Dual Controller

Q,
1. i know 11iv3 uses default native multipath uses,but not uses pvlink?
2. c2t0d0/c3t0d0/c5d0d0, same LUN?(d#?)
3. must need pvlink and san zoning?
4. vglock create method?(storage 1GB lun size)

[Torsten.]

1) native multipathing, no pvlinks

2) ioscan -fn

3) yes, do zoning

4) question not clear; in case of creating lock disk, adjust the cluster configuration file

[mark.M]

3. zoning is one zone?

thank you

[Michal Kapalka (mikap)]

hi Mark,

3. zoning is one zone?

if yo like to redudancy you need to make not only one zone but each HBA should have minimum one conection to your storage.

mikap