Operating System - HP-UX
1753511 Members
5361 Online
108795 Solutions
New Discussion юеВ

Re: turn of polling on disk level

 
Muthu Srinivasan
Occasional Advisor

turn of polling on disk level

I am not able to turn off polling anf i have the current lvm cumulative and commands patch

Any idea what is is error

pvchange -p n /dev/dsk/cxtydz
pvchange: Physical volume "/dev/dsk/cxtydz" could not be changed:
This may indicate that the kernel installed on this system lacks the
neccessary functionality to perform this operation.
6 REPLIES 6
Prashanth Waugh
Esteemed Contributor

Re: turn of polling on disk level

Hi Muthu,

what is the OS version.Pls check it


#uname -a

Regards
Prashant
For success, attitude is equally as important as ability
Muthu Srinivasan
Occasional Advisor

Re: turn of polling on disk level

It is hp-ux 11.23 and IA rx74xx server
RAC_1
Honored Contributor

Re: turn of polling on disk level

Look at the patch level. It's work for me.

what /usr/sbin/pvchange
/usr/sbin/pvchange:
$Revision: @(#) lvm R11.23_BL2007_1025_4 PATCH_11.23 PHCO_36744
There is no substitute to HARDWORK
Muthu Srinivasan
Occasional Advisor

Re: turn of polling on disk level

# swlist -l fileset | grep -i lvm
# LVM B.11.23 LVM
LVM.LVM-ENG-A-MAN B.11.23 LVM Manual Pages for HP-UX
LVM.LVM-JPN-E-MAN B.11.23 LVM Manual Pages for HP-UX
LVM.LVM-JPN-S-MAN B.11.23 LVM Manual Pages for HP-UX
LVM.LVM-KRN B.11.23 HP-UX Kernel support for the Logical Volume Manager
LVM.LVM-MIRROR-RUN B.11.23 LVM Mirror
LVM.LVM-RUN B.11.23 LVM Runtime
# PHCO_31690 1.0 Japanese LVM manpages
# PHCO_36109 1.0 Japanese LVM manpages
PHCO_36109.LVM-JPN-E-MAN 1.0 LVM.LVM-JPN-E-MAN
PHCO_36109.LVM-JPN-S-MAN 1.0 LVM.LVM-JPN-S-MAN
# PHCO_36744 1.0 LVM commands patch
PHCO_36744.LVM-ENG-A-MAN 1.0 LVM.LVM-ENG-A-MAN
PHCO_36744.LVM-MIRROR-RUN 1.0 LVM.LVM-MIRROR-RUN
PHCO_36744.LVM-RUN 1.0 LVM.LVM-RUN
PHKL_31500.LVM-KRN 1.0 LVM.LVM-KRN
# PHKL_36745 1.0 LVM Cumulative Patch
PHKL_36745.LVM-KRN 1.0 LVM.LVM-KRN


I tested in my test server , it is working fine too , not working prod server.
VK2COT
Honored Contributor

Re: turn of polling on disk level

Hello,

Do you have patch PHCO_35524 on the production
server? pvchange command was modified to
add a new option (-p) to enable or disable
LVM's proactive polling behavior of alternate
paths.

Also, pvdisplay command was changed to report
the proactive polling status along with other
information about the physical volume.

Cheers,

VK2COT
VK2COT - Dusan Baljevic
Muthu Srinivasan
Occasional Advisor

Re: turn of polling on disk level

Problem is resolved after installing the couple patch , i will post the patch numbers later