vgdisplay shows no physical volumes and lvdisplay -v shows current extents but PV1 & PV2 sho

[EU-Admins-UNIX]

Hi

My vg00 shows no physical volumes, and lvdisplay -v on vg00 LV's show current extents but PV1 & PV2 show ???.

BDF shows:

Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 2097152 176120 1906528 8% /
/dev/vg00/lvol1 1776056 212152 1386296 13% /stand
/dev/vg00/lvol8 8912896 7771776 1136416 87% /var
/dev/vg00/lvol7 4194304 3195336 991184 76% /usr
/dev/vg00/lvol6 4194304 1401480 2771072 34% /tmp
/dev/vg230/scratch 31440896 11324883 18858815 38% /scratch
/dev/vg00/lvol5 9797632 5146488 4614896 53% /opt
/dev/vg00/lvol4 16318464 4230600 11993520 26% /home
/dev/vg_tariq_test/vol_tariq_test 5226496 18369 4882626 0% /mnt_tariq_test

lvmtab shows:

/dev/vg00
/dev/dsk/c5t8d0
/dev/dsk/c5t10d0

I also attach an ioscan -fnCdisk

Any ideas?

Regards

Tariq

[likid0]

You need to check, it looks like you can't see the devices listed for vg00 on lvmtab anymore:

/dev/dsk/c5t8d0
/dev/dsk/c5t10d0

Get the output of:

uname -a

ioscan -fnkC disk

ls -l /dev/dsk/*

setboot

ioscan -m dsf

also check the modification date of /etc/lvmtab

ls -l /etc/lvmtab*

[arunaphcl]

Please run vgscan command and provide output also lvmtab ouput.

[EU-Admins-UNIX]

Hi All

This is a test server so I took the action of rebooting and see the oucome.  Everything was OK after the reboot.

Thanks for your contributions.

Tariq