LVM and VxVM

vmunix: ct_query failed. hw_path = 0/10/0/0

 
SOLVED
Go to solution
Dave Parmer_1
New Member

vmunix: ct_query failed. hw_path = 0/10/0/0

Has anyone see this error before? The path is to our HP Tachyon XL2 Fibre Channel Mass Storage Adapter on an rp5400 running 11.00. I'm getting the same error on both adapters.

Thanks
2 REPLIES 2
RAC_1
Honored Contributor
Solution

Re: vmunix: ct_query failed. hw_path = 0/10/0/0

Check following thread.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=31221

Anil
There is no substitute to HARDWORK
Sundar_7
Honored Contributor

Re: vmunix: ct_query failed. hw_path = 0/10/0/0


# ioscan -fnH 0/10/0/0

What do you get from the above ioscan ?

Looks like the fibre channel cards are connected to the switch but no devices were
configured i.e zoning has not been done for any devices to be seen by this card.

Were they working before ?
Learn What to do ,How to do and more importantly When to do ?