HP Aries Emulation Migration of C, Sybase 11.9 and SQR 3.0 running at PA-RISC servers

[Gd2]

Thanks so much Rajesh and Dennis. This forum has been invaluable to me.

I have the compiler and tools at PA systems. So I believe I can create a image of this system , restore it at Itegrity and compile at will and run through Aries.

1) How ever my code is running at 11.00 where as the HP Containers are vouched safe for tranisionting software from 11.11 version onwards. So should I first migrate it to 11.11 and if that works I can go in for HP 9000 COntainers?

2) It seems HP 9000 Containers is available free of charge. Is there something I missed on the licensing?

Please advise.

[Rajesh K Chaurasia]

> 1) How ever my code is running at 11.00 where as the HP Containers are vouched safe for tranisionting software from 11.11 version onwards. So should I first migrate it to 11.11 and if that works I can go in for HP 9000 COntainers?

It would be better if you transition your environment to HP-UX 11.11 first and then proceed with containers based transition. This would provide you supported configuration.

However, you could build container from HP-UX 11.0 image and it may work well enough but it won't be supported. Some customers have been successful with deploying containers with HP-UX 10.20/11.0.

> 2) It seems HP 9000 Containers is available free of charge. Is there something I missed on the licensing?

Probably you missed going through the link below in one of the previous replies.
http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c108973a801/?ciid=8c873e797d6ab210VgnVCM200000a460ea10RCRD

Regards
-Rajesh