binutils 2.15 dont support hppa2.0w-hp-hpux11.11

[Peter Michalicka]

The error message is see ld/configure.tgt for supported targets.

Which binutils supports hpux11.11 ?

[Jannik]

you can get it here:
http://h21007.www2.hp.com/dspp/tech/tech_TechSoftwareDetailPage_IDX/1,1703,547,00.html

look for :
binutils 2.15 PA-RISC 11i v1 (binary) (gz, http, 6462 KB) (gz, http, 6311 KB)

[Steve Ellcey]

It looks like you are confusing binutils support and ld support. GNU ld is not supported on any 32 bit HP-UX platform and hppa2.0w is 32 bits despite the slightly misleading name. The rest of binutils, such as the GNU assembler, should configure and build fine.

[H.Merijn Brand (procura]

Steve is right, except for that this exclusion is only for HP-UX on PA-RISC.

Whatever you choose: 32- or 64bit, you will need a binutils and/or gcc for both so choose wisely in your --prefix destination

I chose /usr/local/pa11_32, /usr/local/pa20_32 and /usr/local/pa20_64

Enjoy, Have FUN! H.Merijn