Windows Server 2021 R2 Not detecting HDD during Setup HP Proliant DL30 Gen9

[Azzabat]

Hi,

I was previously trying to install Linux but have since found an iso for Windows Server 2012 R2 so I am now trying to install Windows. I have burned the iso onto a cd to isntall on the server but I am having issues getting Windows Server to detect my hard drive. Please see the below screenshots.

On startup, my server looks like this:

I have setup my HDD as follows:

I have tried to install via Intelligent Provisioning as follows:

But, I get the follow error.

When I try and install directly through the One-Time Boot Menu, it does not detect my hard drive.

I am not sure what I am doing wrong. I am really new to HP and servers in general. Any help with setting this up will be really appreciated.

PS: I bought the server second hand so I do not have warrenty. Is there a way I can still access the vital drivers that require an active warrenty?

Thanks,
Chris

Moderator Edit: Removed the Serial Number for privacy. 

[Azzabat]

PS: Sorry for posting in the wrong place.

[support_s]

System recommended content:

1. Advisory: ProLiant MicroServer - Hard Drive Sequence Viewed in the ROM-Based Setup Utility (RBSU) May Not Align with the Sequence Detected During a Windows Server 2008 R2 Installation

2. HP ProLiant Gen8 Servers - Error: "A media driver you computer needs is missing" During Windows Server 2012 R2 Installation

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Azzabat]

Thanks but this has not solved the issue.

[Steven Schweda]

> I have setup my HDD as follows:

   To what kind of adapter is your disk connected?

   I know nothing, but I'd start with a Web search for "Exposed to OS".
"No" (under "Physical Drive Details") is not what I'd want/expect to see
for that setting.

   Possibly interesting:

      https://community.hpe.com/t5/x/x/td-p/6992414
      https://www.seagate.com/www-content/datasheets/pdfs/3-5-barracudaDS1900-11-1806GB-en_GB.pdf

   Look for "Bytes per Sector".  If that's the problem, then further
research at seagate.com might reveal a way to configure the drive so
that it presents 512 bytes/sector to its adapter.  Reading about your
disk adapter might make some sense, too.

[Azzabat]

Thanks for the reply. I am hoping that might be the issue. Could you tell me how I can edit these settings or do I have to physically remove and re connect the hard drive from the server?

Thanks,
Chris

[Steven Schweda]

> [...] Could you tell me how I can edit these settings [...]

   No.  Knowing nothing, I'd guess that there's a utility program in the
EFI stuff which lets the user configure the (unspecified) disk adapter.
"Array Configuration"?  If I knew what that adapter was, then I'd look
for appropriate documentation.  Possibly interesting:

   https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04406959

   Do you ever _answer_ questions, or do you only ever ask more?  Look
for "?".

> [...] or do I have to physically remove and re connect the hard drive
> from the server?

   I wouldn't expect that to change anything.

   But what do I know?