How I set up the VLAN for the management IP in AP V-M200 ?

[Leandro LL]

How I set up the VLAN for the management IP in AP V-M200 ?

AP 7760 has this configuration.

It seems that V-M200 doesn't have this configuration.

Regards.

[tschaps]

As far as I've seen, there is no special setting. You have to leave the management VLAN untagged on the switch port to which the v-m200 is connected.

[Leandro LL]

I need to tag the management network for the AP M200.

[tschaps]

---

@Leandro LL wrote:

I need to tag the management network for the AP M200.

---

Then you may be out of luck. I don't think you can specify a VLAN # for the management network, therefore it can't be tagged, but only on a v-m200-connected switch port, you can tag it everywhere else. If this is a problem, I don't understand why that couldn't be done, and I am always open to learn new things, so please tell me why.

thx