M and MSM Series

3CRWER100-75 WDS not working

New Member

3CRWER100-75 WDS not working


I have two 3CRWER100-75 (Softwareversion 1.3.06ww). The WDS options seems to be integrated after the installation guide was printed.

All kind of information i have found were about WDS of other routers, which are able to integrate the MAC-address of each other.

I can only switch between STA with the possibility to define the SSID of the root and the ROOT-AP.

I am wondering if someone could help me. The router which is plugged in to the internet i thought should be the root-ap and the other one which should be only a repeater as WDS-STA.

But this one never shows me, that it is connected to the ROOT-AP...

Doesn't matter if they have the same SSID or a different one. Doesn't matter if they are in the LAN settings on or in different range and If only one has activated DHCP or not. The WEP is completely the same.

Is there anyone out there who can give me a step-by-step advise?