M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Choosing new Access Points

 
Highlighted
Jclausen
Occasional Contributor

Choosing new Access Points

I got the following setup:

1 MSM760 controller

40 MSM422 Access points

 

I need to add about 20 AP's on the same location. Would there be something wrong in choosing the new MSM466 instead of the old MSM422?

3 REPLIES 3
Highlighted
JesseR
Regular Advisor

Re: Choosing new Access Points

I wouldn't use a 466 unless you needed external antennas. Otherwise the 430 (2 spactial) and 460 (3 spatial) are the best options for dual radio APs.
Jesse R
Source One Technology, Inc.
HP Partner


MSM 5.7.x deployment guide:

Highlighted
tschaps
Valued Contributor

Re: Choosing new Access Points

I'd agree with Jesse and go further to say that the 466 is ridiculously overpriced. Adding the cost of a dual band external antenna, it's more than twice as expensive than a 430. I'd sooner get two 430's for most situations. I have nine 466's and am not overly impressed.

 

Highlighted
Michael_Breuer
Esteemed Contributor

Re: Choosing new Access Points

Hello,

 

keep in mind that youi might have to upgrade your controller to support the MSM430 or MSM466 APs. Check the release notes of your current version if there are already supported.

 

Cheers,

 

Michael

Ingentive Networks GmbH