M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

E-MSM430 and Guest VLAN

 
Highlighted
R0main
Occasional Collector

E-MSM430 and Guest VLAN

Hi guys,

 

I'm currently trying to configure a corporate and a guest SSID on a same E-MSM430 without any success...

 

I just followed what Peter explains in this post (http://h30499.www3.hp.com/t5/MSM-Series/MSM430-Guest-Network-Setup/td-p/6021235#.Ux3cYed5PDs). So I created a Vlan 14, added the Vlan 14 to the port 1 and Egress the guest Wifi to the Vlan 14. 

 

The thing is that I entered a specific IP address to the VLAN 14 (on the Port1). I tried to ping this IP directly from the Switch and it does not work. I configured the switch port where the MSM430 is connected to untag all VLAN 1 (defaut) traffic and tag vlan 14 for the guest. Behind the HP switch I have a cisco firewall ASA with an IP in the VLAN 14. The communication between the switch and the ASA is okay but not with MSM430.

 

I don't know what I did wrong, does someone have an idea ?

 

Please let me know if you need any other informations !

 

Thanks a lot guys.

 

2 REPLIES 2
Highlighted
Praveen_D
Occasional Advisor

Re: E-MSM430 and Guest VLAN

If your AP is behind firewall you have to open UDP port 38212 and TCP 1194 ports then only AP discovery will work (L2 discovery mode ).

 

R/

Praveen

Highlighted
R0main
Occasional Collector

Re: E-MSM430 and Guest VLAN

i don't have any manager. This is a standalone wireless station. I just try to create two SSID. One guest in a VLAN 14 et one corporate in the default VLAN