M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

E-MSM430 problem to access it.

 
SOLVED
Go to solution
Highlighted
paa2006
Occasional Advisor

E-MSM430 problem to access it.

Hi All,

I have few E-MSM430 APs. One is ok, but others have strange issue - they are successfully obtained ips, I can ping them, but can't access neither with console nor web. In DHCp server base they look like NANAIMO.mydomain 1.1.1.1.

I reset them several times , bot no effect.

What could be wrong with them?

Thanks.

 

 

 

 

 

10 REPLIES 10
Highlighted
Walter001
Advisor

Re: E-MSM430 problem to access it.

I think the AP are running in TFTP-Mode. In this mode you can transfer a firmware-image to AP

Highlighted
paa2006
Occasional Advisor

Re: E-MSM430 problem to access it.

but how? Just up tftp server in the same network? how will AP know about it? Broadcast?

Highlighted
Walter001
Advisor

Re: E-MSM430 problem to access it.

I think APs are already in TFTP-Server-Mode because Firmware/Config is damaged. I would try to put an CIM-File (startup and firmware) with tftp-client-Software

 

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02684335

Highlighted
paa2006
Occasional Advisor

Re: E-MSM430 problem to access it.

Great! Thanks!

I already have V6.6.8.2-HP560-MSM410-MSM430-MSM460-MSM466-MSM466R-B23491.cim , but can't find startup file. 

Could you please help? Where can i get it?

 

 

 

Highlighted
Walter001
Advisor

Re: E-MSM430 problem to access it.

Firmware i've loaded some times ago from HP-website was a zip-files.  *.cim and *.cim.startup was included with same release version.

Highlighted
paa2006
Occasional Advisor

Re: E-MSM430 problem to access it.

I have downloaded two files - V6.6.8.2-HP560-MSM410-MSM430-MSM460-MSM466-MSM466R-B23491.zip and V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385.zip but there is only .cim file there. No cim.startup.

could you please share your startup file with me?

 

Highlighted
paa2006
Occasional Advisor

Re: E-MSM430 problem to access it.

folder contents:

C:\Temp\V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385>dir
Том в устройстве C не имеет метки.
Серийный номер тома: 3614-F8BC

Содержимое папки C:\Temp\V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385

14.09.2018 20:22 <DIR> .
14.09.2018 20:22 <DIR> ..
16.10.2017 17:46 248 828 5200-3857_MSM_3457_RN_5790_Final_Oct-05-2017.pdf
16.10.2017 08:10 281 825 V5.7.9.0-mibs-B23385.tar.gz
16.10.2017 08:10 17 444 452 V5.7.9.0-MSM410-MSM430-MSM460-MSM466-MSM466R-B23385.cim
3 файлов 17 975 105 байт
2 папок 26 063 646 720 байт свободно

 

it's very sad but only cim file.

Highlighted
Walter001
Advisor
Solution

Re: E-MSM430 problem to access it.

I've downloaded V6.5.0.1-HP560-B19720.zip some month ago from HP-homepage(link in thread https://community.hpe.com/t5/M-and-MSM-Series/Need-the-xxx-cim-startup-for-HP-560/td-p/6786204 ). File contained a cim.startup for HP560 but it worked for me on MSM460.  

Highlighted
paa2006
Occasional Advisor

Re: E-MSM430 problem to access it.

Thanks a lot !
I will look there.