M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

HP E-MSM430 802.11x Wireless Clients

 
Highlighted
Viper_x
Advisor

HP E-MSM430 802.11x Wireless Clients

I seem to be getting the following error when a wireless client is trying to authenticate with the NPS server. I am receiving EAP packets on the NPS server when I wireless authenticate from a wireless client (Windows 7) is made. However the NPS server (3.170) seems to reject client access.

 

Logs from the HP WAP:

---------------------------------------------------------------

Mar 26 21:38:11 debug eapolserver Sending EAPOL (frame-length='22') EAP Failure (length='4',id='15') to station (mac-address='00:1c:bf:09:33:26').

 

Mar 26 21:38:11 debug kernel hp_ieee80211_updatelocation_in_bridge: Location not updated: Unable to find device in bridge, or port not ready (dev=r1v1, vlan=324)

Mar 26 21:38:11 debug eapolserver Received RADIUS Packet (Length:'44',Code:'Access-Reject',Id:'99') from RADIUS Server (Ip:'192.168.3.170',Port:'1812') for User (nas-port:'52',username:'xxxx\Administrator').

 

Mar 26 21:38:11 debug eapolserver Sending RADIUS Packet (Length:'657',Code:'Access-Request',Id:'99') to RADIUS Server (Ip:'192.168.3.170',Port:'1812') for User (nas-port:'52',username:'xxxx\Administrator').

------------------------------------------------------------------

Logs from the NPS server Pics attached. (Using packet sniffer) no NPS events triggered

 

The WAP is untagged to a management VLAN another VLAN for domain access which is TAGGED (vlan=324 shown in red above). 

 

Under the VSC tab I have VLAN ID: 324 under egress setup. 

I think I must be missing an attribute or something to establish a successful connection.

 

Any Help would be great.

3 REPLIES 3
Highlighted
Viper_x
Advisor

Re: HP E-MSM430 802.11x Wireless Clients

I really dont understand why this error keeps appearing.. Has anyone seen this error messge before? I cant get a wireless laptop to connect.

 

hp_ieee80211_updatelocation_in_bridge: Location not updated: Unable to find device in bridge, or port not ready (dev=r1v1, vlan=324)

 

 

Any idea?

Highlighted
ISoliman
Super Advisor

Re: HP E-MSM430 802.11x Wireless Clients

Are you using Access Controlled VSC or Authentication only VSC ?? Did you follow the Guide on how to configure this ? search for "MSM Implementation Guide" which will help you configure almost everything on the controller .
Highlighted
Viper_x
Advisor

Re: HP E-MSM430 802.11x Wireless Clients

Thanks for the reply. I dont have a controller unit, the WAP is setup in Autonomous mode.