HP MSM 720 4 Ports for different Subnets - Unable to Provision HP MSM 430

[DamZ]

Hi

I am trying to configure 3 HP MSM 430 APs with HP MSM 720 Wireless Controller. Please see the attached diagram.

Firewall -> HP A5500 Core Switch -> HP MSM 720 -> HP MSM 430

3 APs needs to be in 3 different subnets and will be placed on 3 floors.

When I configured all APs in single VLAN on the controller all working fine. But If I configure 3 VLANs on the controller, APs not provision with the controller.

Please assist..

[MSMenthousiast]

make sure you enable the controlled AP discovery on those VLANs (Controller -> Management -> Device Discovery). Also, are your APs provisionned with static IPs or all you using DHCP? If using DHCP, make sure your sever has an interface on those VLANs.