HP Pro curve access point msm410 (J9427C)

[marty099]

I have 3 of this MSM410 pro curve access point and trying to set them up are very hard when I factory rest them and let them boot up I got on my pc and type in 192.168.1.1 and I get nothing when I change my ip on the PC I still get nothing so I am stuck I have been working on this for 7 hours now please someone help me

Thank you

[parnassus]

Are those MSM410 wireless APs already in Autonomous mode (so not configured to be controlled by a Wireless Controller...)?

[marty099]

Yes thats right thank you for your fast response

[parnassus]

If so (HP MSM410 in Autonomous mode and - better - starting from a Factory Default configuration) then follow onw of these two guides:

• HP MSM410 802.11n AP Installation Guide (March 2013)
• MSM410 Access Point Quickstart

and you should be able to gain access to your(s) HP MSM410 for further Web Based configurations.

[ishouli]

mon ordinateur et mon ordinateur 192.168.1.1 et je n'obtiens rien quand je change d'IP sur le PC, même si je me décroche, j'essaie de faire depuis 7 heures maintenant, c'est-à-dire, encouragez- le