M and MSM Series

HP Pro curve access point msm410 (J9427C)

 
marty099
Occasional Visitor

HP Pro curve access point msm410 (J9427C)

I have 3 of this MSM410 pro curve access point and trying to set them up are very hard when I factory rest them and let them boot up I got on my pc and type in 192.168.1.1 and I get nothing when I change my ip on the PC I still get nothing so I am stuck I have been working on this for 7 hours now please someone help me

Thank you
4 REPLIES 4
parnassus
Honored Contributor

Re: HP Pro curve access point msm410 (J9427C)

Are those MSM410 wireless APs already in Autonomous mode (so not configured to be controlled by a Wireless Controller...)?


I'm not an HPE Employee
Kudos and Accepted Solution banner
marty099
Occasional Visitor

Re: HP Pro curve access point msm410 (J9427C)

Yes thats right thank you for your fast response
parnassus
Honored Contributor

Re: HP Pro curve access point msm410 (J9427C)

If so (HP MSM410 in Autonomous mode and - better - starting from a Factory Default configuration) then follow onw of these two guides:

and you should be able to gain access to your(s) HP MSM410 for further Web Based configurations.


I'm not an HPE Employee
Kudos and Accepted Solution banner
ishouli
Occasional Visitor

Re: HP Pro curve access point msm410 (J9427C)

mon ordinateur et mon ordinateur 192.168.1.1 et je n'obtiens rien quand je change d'IP sur le PC, même si je me décroche, j'essaie de faire depuis 7 heures maintenant, c'est-à-dire, encouragez- le