M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Procurve MSM 760

 
Highlighted
Dave Hlady
Occasional Visitor

HP Procurve MSM 760

How can I configure authentication based on Active Directory group membership rather than the default Dial-up access attribute. Thanks for any help.
2 REPLIES 2
Highlighted
Kyle Massey
Advisor

Re: HP Procurve MSM 760

To configure authentication via AD you need to setup an Authentication VSC with WPA/WPA2 Enterprise with 802.1x. This way the controller will send authentication requests to your RADIUS server. When you configure 802.1x there will be an option for you to pick your remote RADIUS server profile.

You can setup a RADIUS profile in the Authentication section that points to your 2008 NPS/ 2003 IAS server.

You will then need to setup the MSM as a RADIUS client on your NPS/IAS server and setupa RADIUS policy that allows domain users (or whatever group you want) access to the wireless network.


I hope this was what you were looking for.



www.traversasolutions.com;http://www.linkedin.com/pub/kyle-massey/22/23/126
Highlighted
Dave Hlady
Occasional Visitor

Re: HP Procurve MSM 760

Yes, that is it. Thanks for your hwlp.