HTML Based RADIUS Authentication does not capture Username

[Joe_NITEC]

We have a controller where one VSC uses 802.1x AD with RADIUSto authenticate Staff users with a Dynamic Key against our AD.  This in turn pulls through their username so we can see who is doing what and also allows us to log web traffic through our firewall when they are on the wireless.  This is working fine.

The issue we are having is that we have a second VSC using HTML forms authentication for Students.  This is configured to authenticate with the Student Domain via their own RADIUS server.  Authentication works fine and the students do get access to the resources they require however we cannot see what user has been allocated what IP - see screenshot.

This in turn means that our logging systems do not know what student is accessing what sites etc.

Is there anyway that we can ensure this information is captured or do we have to configure a separate RADIUS logging server which will capture what username was assigned what IP and when?

If im explaining this properly let me know and i will try and be clearer

Thanks

Joe

[miken32]

Late reply, but if you look under the Overview section of the VSC, not the AP or group, you can get the information.