HTML-based auth and "always tunnel client traffic"

[smb2207]

Hi

in my teamed MSM760 (ver 6.5.0.1-19720) I'm using an access controlled  VSC with HTML-based user login with external RADIUS Authentication.

There is a way to uncheck the "always tunnel client traffic" feature ?

I would like to have users routed to Internet using local networks after authentication and not through the controllers.

In sites with that option active all works fine but performance are slower than VSC with WPA auth.

Thanks

marco

[svhelden]

I have a similar issue, but I guess that it is not possible because HTML authentication requires tunneling.

The HTML form is on the controller, hence the client needs a tunnel to the controller and an IP address from the controller's range. You would need to disconnect the client after logon and let him reconnect with a new IP ...